Materials We Work With
“Flight ready Inconel components, ±5 microns, delivered on time”
“Inconel & Nickel Based Superalloy Machining”
CNC Machining All Types of Material (Our 5-Axis Compatible)
|
Material |
Characteristics |
Machining Capabilities |
Tolerance Limit |
Best Used In Industry |
|
Lightweight, corrosion-resistant, good strength-to-weight ratio |
Excellent machinability, easy to mill & drill |
±0.005mm |
Aerospace, Automotive, Electronics |
|
|
Aluminium 7075 |
High strength, lightweight, fatigue-resistant |
Moderate machinability, harder than 6061 |
±0.005mm |
Aerospace, Sports Vehicles |
|
Aluminium 2024 |
High fatigue resistance, lightweight, low corrosion resistance |
Good machinability, requires surface treatment |
±0.005mm |
Aerospace, Automotive |
|
Aluminium 5083 |
Marine-grade, excellent corrosion resistance |
Moderate machinability, gummy chips |
±0.005mm |
Marine, Aerospace. |
|
Aluminium 7050 |
High strength, stress-corrosion resistant |
Hard to machine, needs carbide tools |
±0.005mm |
Aerospace, Structural Components |
|
Stainless Steel 304 & 304 L |
Corrosion-resistant, high strength, non-magnetic |
Moderate machinability, high tool wear |
±0.002mm |
Food Processing, Medical, Marine |
|
Stainless Steel 316 |
Superior corrosion resistance, heat-resistant |
Difficult to machine, requires sharp tools |
±0.002mm |
Marine, Chemical, Medical |
|
Stainless Steel 321 |
Superior corrosion resistance, heat-resistant |
Difficult to machine, requires sharp tools |
±0.002mm |
Marine, Chemical, Medical, Aerospace |
|
Stainless Steel 17-4 PH & 15-5 PH |
High strength, corrosion-resistant, hardenability |
Difficult to machine, needs carbide tools |
±0.002mm |
Aerospace, Oil & Gas |
|
Stainless Steel 440C |
High hardness, wear-resistant |
Difficult to machine, slow speeds needed |
±0.002mm |
Aerospace, Bearings, Cutlery |
|
Carbon Steel 1018 |
Low cost, easy to weld, good mechanical properties |
Excellent machinability, easy threading |
±0.005mm |
General Engineering, Construction |
|
Carbon Steel 1045 |
Higher strength than 1018, wear-resistant |
Moderate machinability, needs coolant |
±0.005mm |
Industrial Machinery, Tools |
|
Carbon Steel 4140 |
High Strength, Wear Resistant, Heat Treatable |
Moderate to Difficult |
±0.005mm |
Aerospace, Automotive, Structural Parts |
|
Alloy Steel 4140 |
High toughness, wear-resistant, good fatigue strength |
Moderate machinability, needs carbide tools |
±0.002mm |
Aerospace, Automotive. |
|
Alloy Steel 4340 |
High strength, impact-resistant, good toughness |
Difficult to machine, needs rigid setup |
±0.002mm |
Aerospace, Heavy Equipment. |
|
Titanium Grade 2 |
Lightweight, corrosion-resistant, high strength |
Difficult to machine, requires slow speeds |
±0.002mm |
Aerospace, Medical. |
|
Titanium Grade 5 (Ti-6Al-4V) |
High strength, heat-resistant, biocompatible |
Very difficult to machine, requires coolant |
±0.002mm |
Aerospace, Medical. |
|
Brass C360 |
Excellent corrosion resistance, high thermal conductivity |
Very easy to machine, low tool wear |
±0.005mm |
Electrical, Plumbing, Automotive |
|
Copper C101 |
Excellent conductivity, high ductility |
Difficult to machine, sticky chips |
±0.005mm |
Electronics, Electrical, Aerospace |
|
Copper C182 (Chromium Copper) |
High strength, good wear resistance |
Moderate machinability, slow speeds needed |
±0.005mm |
Electrical Contacts, Resistance Welding |
|
Bronze (C932) |
High wear resistance, good corrosion resistance |
Moderate machinability, needs sharp tools |
±0.005mm |
Marine, Bearings, Industrial |
|
Phosphor Bronze C544 |
High fatigue strength, low friction |
Moderate machinability, slightly gummy |
±0.005mm |
Electrical Contacts, Gears, Bushings |
|
Nickel 200 |
High corrosion resistance, good conductivity |
Difficult to machine, work-hardens |
±0.002mm |
Chemical Processing, Aerospace |
|
Nickel 718 (Inconel 718) |
Extreme Heat & Corrosion Resistance, Very Strong |
Very Difficult |
±0.002mm |
Aerospace, Gas Turbines, Power Generation |
|
Inconel 625 |
High heat resistance, corrosion-resistant, strong |
Extremely difficult to machine, requires carbide tools |
±0.002mm |
Aerospace, Energy, Chemical Processing |
|
Inconel 718 |
High temperature resistance, good mechanical strength |
Very difficult to machine, slow speeds required |
±0.002mm |
Aerospace, Turbines, Oil & Gas |
|
Hastelloy C-276 |
Exceptional corrosion resistance, high strength |
Difficult to machine, work-hardens quickly |
±0.002mm |
Chemical Processing, Marine, Nuclear power Generators |
|
Monel 400 |
Corrosion-resistant, high strength, marine-grade |
Hard to machine, work-hardens |
±0.002mm |
Aerospace, Chemical Processing |
|
Magnesium AZ31 |
Ultra-lightweight, good strength-to-weight ratio |
Easy to machine, but flammable |
±0.005mm |
Aerospace, Automotive, Electronics |
|
Tungsten (W) |
Extremely dense, high strength, wear-resistant |
Very difficult to machine, requires special tools |
±0.002mm |
Aerospace, Nuclear power generators |
|
Molybdenum (Mo) |
High temperature strength, corrosion-resistant |
Hard to machine, brittle |
±0.002mm |
Aerospace, Electronics, Energy |
|
Cobalt Chrome (Co-Cr) |
High wear resistance, corrosion-resistant, biocompatible |
Very difficult to machine, slow speeds |
±0.002mm |
Medical, Aerospace. |
|
Tool Steel A2 |
High hardness, good wear resistance |
Moderate machinability, needs heat treatment |
±0.002mm |
Tooling, Dies, Punches |
|
Tool Steel D2 |
Extremely hard, excellent wear resistance |
Difficult to machine, requires carbide tools |
±0.002mm |
Dies, Molds, Cutting Tools |
|
Tool Steel H13 |
Heat-resistant, good toughness |
Moderate machinability, used for high-temp applications |
±0.002mm |
Die Casting, Injection Molds |
|
Tool Steel M2 |
High-speed steel, very wear-resistant |
Difficult to machine, high tool wear |
±0.002mm |
Cutting Tools, Aerospace Components |
|
Polycarbonate (PC) |
High Impact Resistance, Transparent, Heat Resistant (Up to 140°C), UV Resistant |
Moderate (Soft Material, Requires Sharp Tools) |
±0.01mm |
Aerospace, Automotive, Medical Devices, Safety Equipment, Electronics |
|
PEEK |
High Heat & Chemical Resistance, Strong |
Moderate |
±0.005mm |
Medical, Aerospace, Semiconductor |
|
TEFLON (PTFE) |
Extremely Low Friction, Chemical Resistant |
Moderate |
±0.01mm |
Medical, Food Processing, Industrial Seals |
|
Delrin |
High Stiffness, Low Friction, Good Machinability |
Excellent |
±0.01mm |
Gears, Bearings, Electrical Insulation |
Capabilities
CNC Machining Specifications
- Max Dimensions: 600 mm x 600 mm x 1200 mm
- “Specialists in Magnesium, Inconel & Titanium.”
- Tolerances:
- Linear Dimension: ±0.01 mm
- Hole Diameters: ±0.01 mm
- Shaft Diameters: ±0.01 mm
5-Axis Machining Challenges we Accept
- Difficult-to-Machine Materials: Nickel alloys (Inconel, Monel, Hastelloy), Titanium, Tungsten, and Tool Steels require specialized carbide or CBN tools.
- Work-Hardening Materials: Stainless steels, nickel-based alloys, and copper tend to harden during machining, requiring sharp tools and proper cutting strategies.
- Lightweight Alloys (Magnesium, Aluminium): Easy to machine but require careful handling to prevent burr formation and fire hazards (in the case of Magnesium).
- High-Tolerance Materials: Aerospace and medical industries demand high precision (±0.002mm or better), requiring stable 5-axis setups.